topblog Ivoire blogs

23/09/2015

How to install MPPS V13.02 software driver on Win 7?

MPPS V13.02 EDC16 ECU Tuning Remap Chip tuning CAN Flasher is default to be installed on Windows XP operating system, but some have achieved it on Win 7. Here is the instruction on installing Mpps v13.02 on Win 7. 

 

The instruction fits MPPS V13.02 K+CAN USB cable (SE74, SE74-B)/SMPS MPPS interface with a Driver disk

MPPS-cable-and-disk-1.jpg

MPPS-cable-and-disk-2.jpg

If the driver CD is broken, you can free download MPPS V13.02 driver software here:

http://down.obdexpress.co.uk/mpps-v13.part1.zip

http://down.obdexpress.co.uk/mpps-v13.part2.zip

 

Instruction:

Open driver CD or software file 

Install MPPS13.02.exe setup 

Select software Language (multi-language avaliable), click OK

MPPS-V13.03-install-on-win7-3.jpg

Install hardware wizard, click Next 

MPPS-V13.03-install-on-win7-4.jpg

Select destination C:, click Next 

Click Next 

Click Installation to install driver 

MPPS-V13.03-install-on-win7-5.jpg

Click Finish when installation is completed 

 

If MPPS software prompt “MPPS Firmware Upgrade” message, it is normal when MPPS cable is not plugged in or the driver is incorrectly installed 

Click Exit

MPPS-V13.03-install-on-win7-6.jpg

Now plug the MPPS USB cable with computer 

If win7 fails to automatically install driver, install the driver manually 

MPPS-V13.03-install-on-win7-7.jpg

Go to Start>> Computer>>right click Properties>> Device Manager>> Amt Flash>>Update Driver Software…

MPPS-V13.03-install-on-win7-8.jpg

Select Browse my computer for driver software 

Browse file to C:MPPSDevice Driver 

MPPS-V13.03-install-on-win7-9.jpg

Click Next 

If the system prompts “Would you like to install this device software”, click “Install”

MPPS-V13.03-install-on-win7-10.jpg

Installing driver software is completed 

In windows 7 you will need to run MPPS as administrator, otherwise, software will not open. 

MPPS-V13.03-install-on-win7-11.jpg

Right click MPPS v13.02 software on desktop, click Properties 

Select Compatibility 

Tick Run the program as an administrator, click OK

MPPS-V13.03-install-on-win7-12.jpg

Open MPPS V13.02 software on desktop 

If you try to run MPPS not as administrator or without the cable plugged in you will see following screen 

MPPS-V13.03-install-on-win7-13.jpg

Installation is completed. Start tune ECU with the MPPS software.

http://www.obdexpress.co.uk/service/smps-mpps-v50-edc16-c...

Les commentaires sont fermés.