topblog Ivoire blogs

18/09/2015

Read 5M48H and 8pin IC using VVDI Pro by Xhorse Company

The following paragraphs are about the detailed procedure to read 5M48H and 8pin IC using VVDI Pro by Xhorse Company. Hope it helps.

 

Part 1: VVDI Pro read 5M48H

Open VVDI Pro software, select type, manufacture and model as MC9S12XEP100) 

vvdi pro options-01.jpg

Click “Wiring Diagram” 

 

Maximize wiring diagram: right click and select “zoom window”, then pull down window. 

 

Follow the wiring diagram to connect CAS to the VVDI Pro.

wiring-diagram-02.jpg

Start to connect the cable. 

connect-the-cable-03.jpg

The left zone is done, next is to do the right zone. 

connect-the-cable-04.jpg

In this wiring diagram, it only need to remove one 0 ohm resistor to read out data, but one CAS ECU structure is different another one, some needs remove more electronic parts; we will show how to do in the other videos. 

remove-one-0-ohm-resistor-05.jpg

Next is to remove this 0 ohm resistor. 

remove-this-0-ohm-resistor-06.jpg

Wiring is done, 0 ohm resistor is removed

Finish-connecting-the-cable-07.jpg

Plug adapter into VVDI Pro. 

Plug-adapter-into-VVDI-Pro-08.jpg

Close wiring diagram.

 

Select “New” – “ Read” 

 

You see it is reading data very fast.

 

Reading data successfully, click “Save”

reading-data-successfully-09.jpg

Next is to check data.

Open the data, drag the mouse to check, okay, data is all read out, close it. 

 

Part 2: VVDI PRO read common 8pin IC

Next is use VVDI PRO read common 8pin IC. 

 

Take Elysee immo box for example.

Elysee-immo-box-10.jpg

Blow Elysee 8pin 93C46.

Blow-Elysee-8pin-93C46-11.jpg

Use a clip to insert 8pin 93C46 into VVDI pro adapter and lock it.

8pin-93C46-into-VVDI-pro-adapter-12.jpg

Select Type: 1-EEPROM, Manufacture: ATMEL, Model: AT93C46[A] 

 

Click “New Create” – “Read” 

 

Click “Save” 

 

Done.

07:58 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

Les commentaires sont fermés.