topblog Ivoire blogs

30/06/2015

2015.6 BMW ICOM ISTA-D ISTA-P Rheingold language setting

WIFI BMW ICOM A2+B+C diagnostic system (Item No SP168) comes with latest 2015.06V ICOM ISTA-D ISTA-P 500GB Expert Mode software HDD. Following is a quick 2015.6 BMW ICOM Rheingold language setting guide within 2 minutes.

 

Software Version: 2015.6

Application version: 01.37.00

Boot version: 01.23.01

ISTA-D: 3.48.20

ISTA-P: 3.55.1.001

 

Multi-language: English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Chinese, Japanese, Korean and Thai. 

Diagnose, programming and TIS diagram circuit all have these languages.

 

2015.6 BMW ICOM software HDD language setting:

After well install software HDD, launch BWM ICOM ISTA-D ISTA-P software program, ISTA-D-DE option marked red below must be selected.

BMW-ICOM-ISTA-D-ISTA-P-language-1.jpg

Press on OK button to continue when ICOM software prompt “Please wait while ISTA-D is starting…” message

BMW-ICOM-ISTA-D-ISTA-P-language-2.jpg

The new 2015.06 ICOM Rheingold software default language is German 

BMW-ICOM-ISTA-D-ISTA-P-language-3.jpg

NOTE: 

BWM ICOM software with default German language will carry out faster running speed. If you did not tick ISTA-D-DE option and directly set the language to you need at the ICOM software initial interface. The software will run at a rather slow speed as much as 30 minutes. 

 

Then select Setting icon tab and select the language you need, i.e British English. In this way, BMW ICOM software will run faster (within 2 minutes).

BMW-ICOM-ISTA-D-ISTA-P-language-4.jpg

http://bmwicomseries.webs.com/

05:35 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

29/06/2015

Mercedes Online/Offline SCN coding which Star tool HDD

Mercedes Benz online and offline SCN coding service are available in obdexpress.co.uk. But the MB Star diagnosis Online and Offline coding software cannot fit all software HDD. 

 

Which year Star diagnostic software HDD is possible to open online or offline coding function?

1) Mercedes Benz MB STAR diagnosis software HDD/hard drive before 2013, support both Online and Offline SCN coding 

2) Star diagnosis software during 2013 and 2014.07 support offline SCN coding only, cannot support online SCN coding 

3) 2014.07 to 2015.01 software HDD support neither online nor offline SCN coding 

4) 2015.05V current newest software supports online programming only 

 

NOTE:

Online SCN Coding software is compatible with SD Connect Compact 4 multiplexers. 

DAS Offline SCN coding is compatible with MB SD Connect C4 diagnostic system only. 

 

Only after open online/offline scn coding function, can the programming menu display 

online-scn-coding-for-mb-star-c3-c4-2013-1.jpg

online-scn-coding-for-mb-star-c3-c4-2013-2.jpg

How to order and use the software, please check instructions on our webpage.

http://www.mbstartool.com

08:23 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

27/06/2015

How to install K-TAG KTM100 V2.13 Firmware V7.003 software

Obd2experss.co.uk has newly launched KTAG KTM100 V2.13 firmware V7.003 ECU tuning mater kit. The KTM100 is the replacement of KSuite which brings brand-new interface and makes easier operation. Here is the K-tag KTM100 V2.13 software step-by-step instruction. 

 

Software: KTM100 V2.13 (better than Ksuite software)

Firmware: V7.003 

Language:  English, Italian, Portuguese

 

NOTE: KTM100 software can only be work with KTAG firmware V7.003 Item No SE80-D. 

 

New KATG KTM100 V2.13 Firmware 7.003 new added feature:

1) New add BMW F chassis petrol and Mercedes-Benz W222 models 

2) Software is much easier to use and is very stable. After you connect the car, just choose the large type, KTM100 will recognize the ECU detailed type via ID automatically.

 

Ktag KTM100 V2.13 ECU programmer Software installation instruction:

 

Video instruction:

http://www.dailymotion.com/video/x2vd2al_fw-v7-003-ktag-k...

 

Disable both local network and wireless connection (Very important!!!)

 

1) Install KTAG KTM100 V2.13 setup 

 

Open KTM100 setup in the CD software on My computer 

ktag-ktm100-v2.13-firmware-7.003-1.jpg

Open KTM100 file, then open KTM100 English file (1st file)

Open KTAG KTM100 setup and install Microsoft Visual C++2005

ktag-ktm100-v2.13-firmware-7.003-2.jpg

Install Adobe Reader 7.0.8

ktag-ktm100-v2.13-firmware-7.003-3.jpg

Confirm Setup settings and copy file to Local Disk C automatically

ktag-ktm100-v2.13-firmware-7.003-4.jpg

2) Install K-tag KTM100 V2.13 driver 

 

Open Driver folder on KTM100 folder and install it 

ktag-ktm100-v2.13-firmware-7.003-5.jpg

Select Driver language 

Click Next 

Click Next in Read Me File window 

Press Next to start installation 

Driver installation is completed, press Finish button 

ktag-ktm100-v2.13-firmware-7.003-6.jpg

3) Connect KATG ECU tuning kit 

 

Connect the K-TAG ECU programmer with vehicle and wait the system to find the hardware driver and install it

ktag-ktm100-v2.13-firmware-7.003-7.jpg

Open My Computer>>Manager>>Device Manager>>Universal Serial Bus controllers>>DimSport-New Trasdata Device to check and make sure there is good communication between K-tag and computer.

 

4) Run software 

 

Open KTM100 software on the desktop 

Press OK when system display an message “Error during the server connection” to continue

ktag-ktm100-v2.13-firmware-7.003-8.jpg

Select Options tab to choose the language you want

ktag-ktm100-v2.13-firmware-7.003-9.jpg

Check vehicle and ECU type list on Info Plugins tab 

ktag-ktm100-v2.13-firmware-7.003-10.jpg

Select certain ECU brand and tick Checksum Info button on the bottom, another window will bring the checksum information 

ktag-ktm100-v2.13-firmware-7.003-11.jpg

Select Interface tab, and select vehicle make, model, engine and year information. Here is example of program VW Bosch EDC17 ECU. Then press ID button, confirm you have selected the correct connection mode 

ktag-ktm100-v2.13-firmware-7.003-12.jpg

Then the ECU information will fully displayed on the REPORT column 

Select read/write ECU via Micro, EEPROM etc on OPERATION part, click on Read 

ktag-ktm100-v2.13-firmware-7.003-13.jpg

After complete read ECU, save your file to a certain folder 

ktag-ktm100-v2.13-firmware-7.003-14.jpg

Check ECU plugin and tick Manual icon to view detail plugin

ktag-ktm100-v2.13-firmware-7.003-15.jpg

ktag-ktm100-v2.13-firmware-7.003-16.jpg

05:56 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)