topblog Ivoire blogs

29/05/2015

VAS 5054A ODIS 2.2.3 and Postsetup 6.2.2 Free download

VAS 5054A ODIS/VAS-PC diagnostic software for VAG group (VW, Audi, Skoda, Seat) has released to the current V2.2.3. Here are the free download resources of ODIS V2.2.3 and ODIS-E Postsetup 6.2.2. 

 

Computer Requirements:

-O.S.: Windows XP; Windows Vista; Windows 7

-CPU: Pentium/Athlon 1 GHz or higher

-RAM: 512 MB of system memory

-Hard Drive: 60 GB of available space

-DVD-ROM

 

Vas 5054a ODIS (Offboard Diagnostic Information System) V2.2.3 crack 

http://www.mediafire.com/download/mcfkqzivz7zdv5r/Odis.2....

Vas 5054a ODIS-1.jpg

Vas 5054 ODIS-E Postsetup engineering software 6.2.2

http://www.mediafire.com/download/747r93zb0orm44z/ODIS-E_...

Vas 5054a ODIS-2.jpg

NOTE: We are not responsible for the free download crack and postsetup. If you need legal and save ODIS 2.2.3 software, please order here. 

(超链接http://www.obdexpress.co.uk/wholesale/odis-software-vas-5... )

Vas 5054a ODIS-3.jpg

Vas 5054a ODIS-4.jpg

Vas 5054a ODIS-5.jpg

Vas 5054a ODIS-6.jpg

VAS 5054 ODIS 2.2.3 Video Instruction 

http://www.dailymotion.com/video/x2lj08d

 

VAS 5054a 2.2.3 ODIS software installation blog

http://blog.obdexpress.co.uk/2015/05/15/vas-5054a-audi-vw...

 

1) Install odis 2.2.3 + postsetup 6.2.2 follow guide

2) Install drivers/VAS 5054A FIRMWARE UPGRADE / D-PDU API'S / D-PDU_API V1.20.23

3) VAS 5054a firmware patch- rewrite folder VAS5054a of the archive in C:ODISPDUAPIVEN-SOFTING1.20.023VeCom/VAS5054

4) Connect VAS5054a PC with USB locate drivers

5) Pair your computer with a Bluetooth VAS5054A with OKI chip find hwconfig

 

FAQ:

 

Q1: Can VAS PC and ODIS co-exist on the same Windows installation? 

A1: Yes, you can. In the ODIS will start the selection start ODIS or VAS-PC (one Window). 

 

Q2: What’s the difference between ODIS and VAS PC?

A2: ODIS is new software and VAS-PC is older software for vas 5054a interface. 

 

Q3: What is the difference of Odis and ODIS-E PostSetup?

A3: ODIS-E Postsetup is engineering software of ODIS. With it you can make much more as with the odis (service/dealer) version. It supports directly diagnose and update/flash ECU

 

Q4: I installed odis and it ask me for user name and password when I am doing diagnosis. ODIS have installed license? 

A4: If license is not installed your ODIS requires Admin and password. 

 

Q5: Hi, I install the ODIS 2.2.3 version, but the PostSetup configuration data input program says its not the right path /url for the poststetup and can´t find any data.

Vas 5054a ODIS-7.jpg

A5: Two solution provided: 

1. 

1)Change the the "postsetup" folder name to : "updates"

2)Then change folder name "Odis" to "ODIS_Engineering".

 

2. 

1).Create Odis_Engineering folder in the root of C://.

2).Extract postsetup.iso

3).Copy Trade-Retail folder to Odis_Engineering, the way should be с:/Odis_Engineering/Trade-Retail/software/postsetup/6.2.2/site.xml

4).Install Link Shell Exstension. 

5).Right click site.xml file in с:/Odis_Engineering/Trade-Retail/software/postsetup/6.2.2 folder, choose Pick Link Source from menu.

6).Go to C://, right click anywhere and choose Drop As../Hardlink clone

7).Try to install postsetup again, the way should be root of C.

05:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

28/05/2015

How to update Bluetooth XTOOL PS2 GDS heavy duty scanner?

Xtool PS2 GDS is a hand-held diagnostic system covering most of gasoline heavy duty vehicles on the aftermarket. The Bluetooth PS2 diagnostic system can not only project basic diagnostic function, but support some special functions, such as oil service light, oil inspection, service mileage, service intervals and airbag. XTOOL PS2 system can be updated online. 

 

How to update XTOOL PS2 GDS heavy duty truck diagnostic scanner?

1) First of all, go to www.xtooltech.com and login in to user center with User Name and password. 

Xtool-PS2-GDS-truck-scan-tool-1.jpg

2) Select “Download Center” option under “Navigation” tab 

 

3) Enter Download Center program, download the “Update Tool” 

Xtool-PS2-GDS-truck-scan-tool-2.jpg

4) Then download the software you need to update 

Xtool-PS2-GDS-truck-scan-tool-3.jpg

5) Save the update software to be downloaded to a certain folder 

 

6) Open and run Xtool “Update Tool-V* exe” setup on the desktop 

Xtool-PS2-GDS-truck-scan-tool-4.jpg

7) Follow the system prompt until the update tool installation is completed 

 

8) After installation finished, remove the SD card from the Xtool PS2 truck diagnostic tool, put the card into the SD card reader and then connect the SD card reader to the USB on your computer. 

 

9) Open the Xtool Update Tool on the desktop when the SD card has successfully connected with your computer 

Xtool-PS2-GDS-truck-scan-tool-5.jpg

10) Click the browse button to select the folder where you going to put the software winrar files. 

Click Confirm button and it will reads your PS2 serial number and the software. 

Xtool-PS2-GDS-truck-scan-tool-6.jpg

11) Select the software to be updated and click the “Update button” to update 

Xtool-PS2-GDS-truck-scan-tool-7.jpg

12) The PS2 GDS software update may take some time. Wait patiently until the update procedure is completed.

08:35 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

27/05/2015

KESS ECU Tuning V2 2.12, 2.13 FW 4.036 Report and Review

Obdexpress.co.uk has extracted firmware V4.036 KESS V2 ECU tuning kit at the version V2.12 and V2.13. Following are kess information, tutorial and customer review gathering in order to have a better understanding of the Chinese clone KESS V2. 

 

NEW KESS V2 OBD2 Manager FW v4.036 Tuning Kit No Token Limitation

 

Software: V2.12, V2.13

Firmware: V4.036

KESS V2 ECU tuning-1.jpg

KESS V2 ECU tuning-2.jpg

Support one button click to charge tokens!!!

 

When token run over, just click this renew button on the main unit, then it will go back to 30 tokens. NO NEED change or desolder the chips, no need tokens programming. 

KESS V2 ECU tuning-3.jpg

Instructions:

How to install V2.13 software for KESS V2 ECU programmer with V4.036 firmware

http://www.dailymotion.com/video/x2neh44_how-to-install-v...

 

Operating system: Win XP (most used) or Win 7

 

Language: English, German, Spanish, Italian, Portuguese, French

 

Free download KESS V2 FW4.036 K-suite V2.12, V2.13 software

 

 

 

NOTE: 

We have tested the stability of K-Line, CANBUS, Tricore, J-tag and BDM before shipping out.

We confirm that our KESS does support EDC16 but DOES NO support EDC17 at present 

If you are a truck tuner, unfortunately there are only a few truck models available, but most of them VAN.

 

Here is our test photo: 

KESS V2 ECU tuning-4.jpg

Review from our customers:

1) I purchased one and it arrived within 7 days, tracking was included. I thought I has to replay about this clone kess v2 kit. I tested it on Renault Megane III valeo ECU at the first day, ID read fine, Writing ECU fine. 

Then I tested on a piaggio mp3 scooter using K-line.

ID read fine

Reading ECU was fine.

Writing ECU was fine.

See picture below..

KESS V2 ECU tuning-5.jpg

KESS V2 ECU tuning-6.jpg

So I am satisfied with the purchase. 

 

2) I have installed the Software version: V2.13. Firmware version: V4.036 with the help of the video in the webpage. It's important to strictly follow the instructions on the video. I have make a mistake at first install and got the EEFFACE error. I have send mail to vendor. Quick response by mail and now all works fine. Tested yet on EDC15C2 on table, read and write. Next week I will test on more ECU's. The Kess is more userfriendly than FGTech galletto. I'll buy also the Ktag from this seller. Good service and quick delivery.

 

3) I have done 15 cars without a problem and for 100 euro (V2.12).  I think it is a steal. As for the trucks section if I remember right it is open but cause I don’t have interest in trucks. I did not pay attention to this section. But I will test and report back.

 

4) I have installed V2_13 KESS and already tested on EDC15C2 in boot mode. Reading was OK, writing was OK as well. Tomorrow I have to do a DPF off of a Touareg 2.5l from 2009. I checked it is in the car list.

 

5) I tested in 4 cars for the time being and everything worked fine. I checked the truck section and can confirm that nearly all of the trucks are grayed out, except for Vans. I have not had the chance to test on 24v trucks Mainly Fords, Mercedes Sprinters are enabled.

KESS V2 ECU tuning-7.jpg

08:18 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)