topblog Ivoire blogs


Using FGTech Galletto 4 to flash a VAG Bosch EDC16U34 ECU via BDM?

Multi-language FGTech Galletto V54 is the fastest and most secure chip tuning tool supporting wide range of vehicles, including car, Truck and Motorbike, even Marine, BDM MPCxx and checksum.Today we will show you how to flash a VAG Bosch EDC16U34 ECU with Fgtech 2 via BDM by FGTech Galletto 4-Master. 



V54 FGTech Galletto 4 Master BDM-TriCore-OBD Function Full Set

Supported OS: A laptop running Win XP home (without any anti-virus software and internet/network connection)


Guide for you to flash VAG Bosch EDC16U34 ECU:

Step1: Install the V54 FGTech Galletto 4 Master Software.

Install FGTECH galletto software follow the video guide


Step2: Connect the V54 FGTech ECU tuning kit with computer, setup boot and BDM.



Step3: Find out the BDM pads showed on the picture bellow.


Step4: Carefully align with the BDM Port ECU programming spring adapter/probe drop and secure frame.


Step5: Make sure everything is connected correctly, as in your PDF file.

Step6: Run FGtech V54 software, accept the system notice.


Attention: Make sure you have 12V+ feeding FGTECH 4 master main device and the intermediate adapter.


Step7: Switch intermediate adapter to ON, the read LED indicator will flash

Step8: Click the Option list as the order: "Select Driver"=> "BMD-Jtag"=>"Connect".


Step9: The system is building communication between V54 FGTech Galletto 4 Master and computer. If communication is well built, green bar will start loading and finally display ECU information.


Step10: Ready to read and write ECU. Choose "Read Eeprom", follow the system prompts to read eeprom.

Step11: Then select "Write Eeprom", follow the system prompts.


Step12: Turn the switch off when complete write eeprom.

Step13: After the programming finished, exit FgTech V54 software program.

05:09 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

Les commentaires sont fermés.