topblog Ivoire blogs


How to generate Ford Mondeo DPF with the VCM 2 IDS diagnostics tool

Ford comes with activate DPF (diesel particle filter). Active regeneration of these DPFs is employed when the exhaust temperatures are too irregular for a passive system to regenerate consistently. Here is an instruction on generating Ford Mondeo 2005 DPF and recoding datastream with Ford VCM 2 IDS.

Tools needed:

Ford VCM2 IDS diagnostic system V86 / V91 / V94 (newest version)

A laptop running Windows XP mode

Well install Ford VCM ii software

Connect the VCM II diagnostic tool with vehicle via OBD port or WIFI wireless connection

Select function tab, then press Powertrain >> Service Functions >> PCM


Check the function option under "Service Functions" menu, then click "EXIT" to select item for more information. Press the Tick mark on the right bottom.


VCM IDS will display detail vehicle information, engine type, VIN etc

Select control unit tab, select Powertrain >> Engine


Turn ignition to ON position

Select Equipped or Not Equipped Air Conditioning: Equipped

Select Equipped or Not Equipped EGR system: Equipped


Then come to the following program, the gray icons are valid, press B + (VOLT) and FRT (TEMP) buttons to turn to gray.


You will be able to view the live data stream



Press the icon on the up right corner, select "Save recoding group", press the tick mark


Enter the Filename model year and engine "MONDEO 2005 TDCI"


Enter Description: "GOOD RUNNING CAR"


Select recoding to save: 1, press Tick mark

Exit the program

Select "DataLogger" function


Select Powertrain >> Engine

Check the file saved

View the datastream recorded

Exit the Ford IDS software program disconnect the VCM2 system

08:48 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

Les commentaires sont fermés.